Gen3 Supercars, and the Rules That Keep a Mustang and Camaro Level
Features

Gen3 Supercars, and the Rules That Keep a Mustang and Camaro Level

Photo: Hiflex480, CC BY-SA 4.0, via Wikimedia Commons · Source · Licence

A control chassis, 67 per cent less downforce and a lower roll cage: how the Gen3 rulebook tries to keep Ford and Chevrolet level.

FeaturesBy 8 min read
The short answer

Gen3 is the Supercars rulebook introduced in 2023 to cut costs with control parts, a coupe-friendly chassis and 67 per cent less downforce. The Ford Mustang and Chevrolet Camaro both use it, with a 5.4L Coyote V8 and a 5.7L LTR V8, balanced by a technical parity regime.

Chevrolet came back to Australian touring car racing in 2023, for the first time since 1984, with a Camaro built on the same control chassis as the Ford Mustang it races.

What is the Gen3 Supercar?

Gen3 is the technical rulebook that took over the Supercars Championship in 2023, replacing the Car of the Future regulations that began in 2013. Its stated aim is lower costs, through more standardised components and a chassis redesigned to favour coupe bodies. It brought a Camaro and a Mustang to the grid.

The change came late. Gen3 was due to debut midway through 2022, but international supply chain problems and domestic disruption from the COVID-19 pandemic pushed it back a year. When it arrived, it was the sport's headline rule change for the 2023 season, the twenty-fifth running of the Supercars Championship.

Gen3 Supercars: three bodies and three engines on one control chassisBodyEngineChassisFord Mustang GT5.4L Coyote V8Chevrolet Camaro ZL15.7L LTR V8Toyota GR Supra5.2L 2UR-GSE V8Control chassisControl parts: pedal kit, brake kit, wheels
Every Gen3 car shares one control chassis and set of control parts, so the differences come down to the body and the engine.
Chevrolet's first appearance since 1984 put a Camaro against a Mustang on a chassis the series itself specifies.

What did Gen3 change on the car?

The rulebook added control components, meaning parts that every team must buy to one specification. The pedal kit, brake kit and wheels all became control parts, and tenders for the rims required them to be "finger friendly" for pit crews during a stop.

The roll cage was lowered by 100mm to suit coupes. The reason was a controversy over the Ford Mustang GT, whose roof had to be stretched beyond the dimensions of the road car to fit the Car of the Future chassis. Supercars manufactures the roll cage in kit form for teams that cannot afford to build one.

Aerodynamic downforce was cut by 67 per cent. The aim was closer racing and easier overtaking, after drivers complained about dirty air and aerowash from the Gen2 cars. Minimum weight fell from 1,400 kg to 1,335 kg, with a 95 kg minimum for the driver and seat combined, and it was later increased to 1,340 kg from the Sandown 500.

Fuel changed too. A new E75 blend replaced the E85 used since 2009, using more renewable bio fuels to lower carbon emissions. During 2023 the series added an LED display on the windscreen showing a driver's position to spectators, from the Perth SuperSprint, and a Full Course Yellow system ahead of the Gold Coast 500, though it was not used there.

How can a Mustang and a Camaro share a chassis?

Think of two actors in different costumes on the same stage set. The Supercars Championship says its cars are loosely based on road cars, built on a control chassis with only certain body panels common to the road car and the racer. A racing Mustang is therefore not a road Mustang with the interior stripped out. It is a purpose-built racing car given a Mustang's shape, and the Camaro is built on that same control chassis.

That arrangement is what makes parity possible. If everything beneath the skin is common or tightly controlled, the differences come down to bodywork and the engine. Technical parity is the series' stated goal: whichever approved car a team picks, it should still be able to build a winner.

What engines power the Gen3 cars?

All cars use bespoke, race-prepared versions of current production engines supplied by GM, Ford and Toyota.

CarRace engineLayout
Ford Mustang GT5.4L variant of Ford's Coyote V8DOHC
Chevrolet Camaro ZL15.7L variant of GM's LTR V8Pushrod
Toyota GR Supra (from 2026)Bespoke 5.2L variant of the 2UR-GSE V8DOHC

The intention was to modernise the engines and sharply cut the cost of building and maintaining them.

The road cars are a different matter. The road Mustang GT uses a 5.0 L Coyote V8 with 480 to 486 HP, and the Dark Horse makes 500 HP. The top-of-the-range Camaro, the ZL1, has a supercharged 6.2 L V8 making 650 hp, and the SS has a 6.2 L V8 with 455 hp. The racing versions are not those engines but bespoke variants built to the rulebook.

Who built the Mustang and the Camaro for racing?

Two teams oversaw development. Triple Eight Race Engineering led work on the Chevrolet Camaro ZL1, which was chosen after General Motors decided to discontinue the Holden brand and end Commodore production. Dick Johnson Racing oversaw the S650 Mustang. Ford revealed the Mustang GT Supercar at the 2022 Bathurst 1000, and the road car launched on 14 September 2022 at an event called "The Stampede", where a V8 Supercar version was among the track-only models shown.

The manufacturer changes in 2023 were big. Chevrolet replaced Holden and the ZB Commodore with the Camaro Mk.6, and every Ford team moved to the Mustang GT S650. Walkinshaw Andretti United switched from Holden to Ford, giving Ford Performance factory support to five teams: Dick Johnson Racing, Tickford Racing, Blanchard Racing Team, Grove Racing and Walkinshaw Andretti United.

Why is parity such a fight?

It has been since the V8 formula began. The rules were confirmed in June 1992, with Class A reserved for Australian-built 5.0-litre V8 Fords and Holdens, and their large front and rear spoilers were designed partly to give them a chance against the Nissan Skyline GT-Rs in endurance races. The formula started in 1993, with the Falcon EB and Commodore VP both on American-based engines limited to 7,500 rpm. Ford won the opening three rounds, and Holden teams protested that the Fords had an aerodynamic advantage. After round five at Winton, Holden was given a new front and rear wing package. Concessions to each make remained a talking point for years afterwards.

In 1998 and 1999 the Holden Racing Team dominated, and in 2000 the Commodore's front spoiler lost 100 millimetres. Ford threatened to withdraw, though nothing came of it. After Holden dominated again in 2001 and 2002, the series brought in Project Blueprint in 2003, developed by Paul Taylor and Wayne Cattach over two years.

Blueprint made the chassis pick-up points, wheelbase, track and driving position common to both makes. Holden had to adopt double-wishbone front suspension and a Watts link at the rear, and differences in engine porting were removed. Ford won the championship in 2003, 2004 and 2005, and Holden in 2006. The balance did not hold. The Holden VE Commodore of 2007 was longer, wider and taller than the Ford BF Falcon and outside the Blueprint limits, so it was allowed shortened rear doors and a lowered roofline.

Gen3 inherits that history. Its answer is to control more of the car. Even so, the minimum weight changed within the first season, from 1,335 kg to 1,340 kg from the Sandown 500, which shows that the numbers are still adjusted as racing exposes differences.

How has the championship widened beyond Ford and Holden?

Parity has to cover more than two makes now. The 2013 rules opened the series to new manufacturers. Nissan committed first, with four Altima L33s. Erebus Motorsport then ran Mercedes-Benz E63 AMGs for a short time, and Garry Rogers Motorsport did the same with Volvos. A Ford and Holden duopoly returned in 2020 when Nissan left, Ford having replaced the Falcon with the Mustang in 2019. Holden announced its final year in 2022. Toyota entered the championship in 2026 with the GR Supra.

The series itself is bigger than a rivalry. It is broadcast in 137 countries, has an average event attendance of over 100,000, and the Adelaide Grand Final draws more than 285,000 a year. Ownership changed in December 2021, when Archer Capital and the teams sold their shares to a new owner, Race Australia Consolidated Enterprises.

How do the points and race formats work?

Race formats vary from event to event. Sprint races run between 100 and 200 kilometres (62 and 124 mi), street races between 125 and 250 kilometres (78 and 155 mi), and the two-driver endurance races are held at The Bend 500 and Bathurst. Points go to a driver whose car finished at least 75 per cent of the race distance and was still running at the end. A race must reach 50 per cent of its planned distance to count, and no bonus is paid for fastest lap if the driver was classified outside the top fifteen.

The points scale depends on the event. The Sandown 500 and Bathurst 1000 use the endurance scale, the Newcastle 500, Townsville 500, Sydney SuperNight, Gold Coast 500 and Adelaide 500 use a two-race scale, and the SuperSprint rounds use their own scale, with Melbourne given a separate one. At the Sydney SuperNight 5 points are awarded for the fastest lap.

What happened in the first Gen3 season?

The 2023 championship was the sixty-fourth season of touring car racing in Australia. It ran at twelve circuits, down from thirteen in 2022. The Newcastle 500 returned as the opener after three years away, and the Sandown 500 came back as the precursor to the Bathurst 1000 for the first time since 2018. Pukekohe Park Raceway closed.

Brodie Kostecki and Erebus Motorsport won their first Drivers' and Teams' championships respectively. Three wildcard entries were granted, including a third Triple Eight car for Zane Goddard, who paired with Craig Lowndes for the Sandown 500 and Bathurst 1000.

What does it mean for someone who wants the road car?

Both road cars are tied to the racing story. The seventh-generation Mustang, built at Flat Rock Assembly Plant, began production on 1 May 2023 with a 2.3 L EcoBoost making 315 HP or a Coyote V8. In April 2026 Ford announced a Mustang Dark Horse T8-Spec Pack for Australia, limited to 250 units and made with Triple Eight, with the regular Dark Horse returning in 500 units in the fourth quarter of 2026. The conversion is carried out at Broadmeadows.

The sixth-generation Camaro, which went on sale for the 2016 model year, ended production on 14 December 2023. It sits on GM's Alpha platform, shared with the Cadillac ATS and CTS. Its most extreme version was the ZL1, with a 650 hp supercharged V8, and the ZL1 1LE lapped the Nurburgring Nordschleife in 7 minutes 16.04 seconds in 2017.

The Mustang family has grown in other directions. The Dark Horse SC, unveiled on 15 January 2026, has a supercharged 5.2L Predator V8 with 795 hp (593 kW) and 660 lb ft (895 N m), and the Mustang GTD, a street version of Ford's GT3 racer, makes 815 hp (608 kW). Road-car transmissions at launch included a Getrag 6-speed manual on the GT, a Tremec 6-speed manual on the Dark Horse and a 10-speed automatic.

Frequently asked questions

When did Supercars Gen3 start?
Gen3 made its debut in the 2023 Supercars Championship. It had been due midway through 2022, but international supply chain problems and domestic disruption caused by the COVID-19 pandemic delayed it by a year. It replaced the Car of the Future regulations from 2013.
What fuel do Gen3 Supercars use?
A new E75 blend was introduced with Gen3, down from the E85 used from 2009. The blend uses more renewable bio fuels to lower carbon emissions. E85 had been brought in to improve the environmental image of the sport, cutting carbon dioxide by up to 50 per cent but raising fuel consumption by 30 per cent.
Is Holden still racing in Supercars?
Holden announced 2022 as its final year of competition, and General Motors decided to discontinue the brand and end Commodore production. Chevrolet returned in 2023 for the first time since 1984, with the Camaro replacing the Holden ZB Commodore.
Does Toyota race in Supercars?
Toyota made its debut in the championship in 2026 with the GR Supra. It supplies a bespoke 5.2L version of its 2UR-GSE DOHC V8, so the field now has three engine makers: GM, Ford and Toyota.
How heavy is a Gen3 Supercar?
Minimum weight was cut from 1,400 kg to 1,335 kg when Gen3 started, with a 95 kg minimum for the driver and seat combination. It was later increased to 1,340 kg from the Sandown 500.

Sources

  1. 2023 Supercars Championship - Wikipedia
  2. Supercars Championship - Wikipedia
  3. Ford Mustang (seventh generation) - Wikipedia
  4. Chevrolet Camaro (sixth generation) - Wikipedia
Next story / Features

Bathurst 1000 is a public road turned into a 1,000 km Supercars race