Features

Car Trade Bodies ACEA, Alliance for Automotive Innovation, MEMA and SEMA

A European carmakers' lobby, a Washington alliance, a century-old parts association and the group behind the Las Vegas modifiers' show each push the car industry's case in a different way.

FeaturesBy 9 min read
The short answer

ACEA lobbies for carmakers in the European Union. The Alliance for Automotive Innovation represents car and light truck makers in the United States. MEMA speaks for more than 1,000 parts and component makers, and SEMA represents aftermarket and specialty equipment companies and runs the SEMA Show.

In 1970 the Speed Equipment Manufacturing Association dropped the word speed from its name. Government regulation was becoming a problem for the group, and its corporate counsel, Earl Kitner, feared that officials might link the word with the swinging generation. The result was the Specialty Equipment Market Association, SEMA, which had started in 1963 and went on to run a trade show that grew from 3,000 visitors and five cars in 1967 to a total attendance above 150,000 today.

SEMA is one of four trade bodies that speak for the car industry on either side of the Atlantic. The others are ACEA in Europe, and the Alliance for Automotive Innovation and MEMA in the United States. Each represents a different slice of the business, and each takes positions that eventually reach the cars on sale.

What do ACEA, the Alliance for Automotive Innovation, MEMA and SEMA do?

BodyBased inSpeaks forKey date
ACEAEuropean UnionCarmakers and truck makersSuccessor to CCMC (October 1972) in February 1991
Alliance for Automotive InnovationWashington, D.C.Car and light truck makers, plus suppliers and startupsPredecessor formed 1965; merger in January 2020
MEMAUnited StatesMore than 1,000 parts and component makersFounded 1904
SEMAUnited StatesAftermarket and specialty equipment companiesFormed 1963
Which trade body speaks for parts makers, carmakers and the aftermarketParts andcomponent makersMEMAMore than 1,000 companiesCarmakersACEAAlliance for AutomotiveInnovationEurope and theUnited StatesAftermarket andspecialty equipmentSEMA6,383 member companies
MEMA speaks for the parts makers, ACEA and the Alliance for Automotive Innovation for the carmakers, and SEMA for the aftermarket.
SEMA dropped the word speed from its name in 1970 because officials might not like it.

What is ACEA and who are its members?

The European Automobile Manufacturers Association, known by its French initials ACEA, acts as the principal lobbying and standards body for the car industry across the EU. In February 1991 it succeeded the CCMC manufacturers committee. The CCMC had been founded in October 1972 by French makers Citroen, Peugeot and Renault, German makers Mercedes-Benz and Volkswagen, Italian maker Fiat and British Leyland from Britain.

Today's members include the Volkswagen Group, BMW, Renault, Ferrari, Toyota Europe, Honda, Nissan, Ford of Europe, Hyundai Motor Europe, Mercedes-Benz Group and Jaguar Land Rover, plus the truck makers Iveco, DAF, Daimler Truck and Volvo Group. Its presidency has rotated among French, Italian and German manufacturers.

Membership is not fixed. On 13 June 2022 Stellantis said it would leave ACEA by the end of 2022, describing a new approach to the challenges of future mobility that moved away from traditional lobbying. On 8 July 2022 Volvo Cars announced its own exit by the same date, saying its zero-emission strategy was out of step with ACEA's.

Engine oils, charging plugs and research

One long-running area of ACEA work, going back through its predecessors to 1919, is performance quality classifications for four-stroke engine oils. In 2016 the group was looking at electric vehicle charging, expecting Type 2 Mode 3 connectors to serve at home as well in a second phase after 2017, with Mode 2 still permitted on established plugs. It also promotes vehicle safety technology as a way of improving road safety.

Joint research is channelled through EUCAR, which dates from 1994 and sits inside ACEA. Between them, makers and suppliers back 30% of all R&D in the European Union. In October 2025 ACEA announced ACEA:intelligence, a digital company providing data on Europe's automotive industry.

What does the Alliance for Automotive Innovation do?

The Alliance for Automotive Innovation is a Washington, D.C. trade association and lobby group for manufacturers of cars and light trucks selling in the United States. Its roots lie in the Automobile Importers of America, formed in 1965 to keep import companies informed about changes to federal and state regulation. After the 1973 oil crisis lifted the market share of often more fuel-efficient imports, Ford Motor Company and the autoworkers' union UAW accused importers of dumping and unfair trading. The importers' group got the case dismissed in 1975.

As foreign makers began building US plants in the 1980s, the group widened its focus and, in 1990, became the Association of International Automobile Manufacturers. In 2011 it became the Association of Global Automakers. Its president and CEO, John Bozzella, took over on 1 April 2014 from Michael J. Stanton, who had held the post since 2006. In January 2020 it combined with the Alliance of Automobile Manufacturers, and the merged body took its present name, representing nearly every maker selling cars and light trucks in the United States, including General Motors, Ford and Chrysler, with suppliers and startups welcome too.

The association reported that in 2018 the industry invested US$125 billion in research and development and earned more than 5,000 global patents. In 2011 its members employed 81,000 people in the US, with plant investments of $45 billion, and accounted for 42% of vehicles sold in the country.

Emissions and fuel economy

The Alliance opposes letting individual states set emissions or fuel economy standards tougher than federal ones. In 2007 it sued California to argue that the state had no authority over greenhouse gas emissions, because the only way to reduce them significantly was better fuel economy and, under 1975 federal energy law, only the Department of Transportation could set that. It also argued that a patchwork of state rules would raise the price of cars and cut model choice. A district court judge ruled against it in December 2007, and it appealed. In 2009 it backed the single national fuel economy standard agreed by the Obama administration, which led to outstanding suits being dropped. It has also supported changes that would have required automakers to improve mileage by 5 percent a year until 2025.

Electric vehicles and charging

In the third quarter of 2021 the Alliance reported that electric vehicles made up 6% of light-duty sales, a record 187,000 vehicles, with California taking nearly 40% of US purchases. The sales were 11% higher, while gasoline and diesel car sales rose 1.3%. After the Biden administration's August 2021 order calling for half of new vehicles sold in 2030 to be zero-emission, the Alliance said it supported the aim but argued that charging needed more investment, since the US then had 40,000+ active stations. It later published recommended attributes for charging stations covering charging rates, grid requirements, costs and layouts. In 2025 its position was firmer on regulation: in February it urged the Senate to strip California of its power to enforce Advanced Clean Cars II, and in March it testified against adopting the policy in Illinois.

Safety, repair and fuel

The Alliance asked the safety regulator NHTSA in October 2021 to allow adaptive driving beam headlights, and in February 2022 the administrator signed a rule revising FMVSS 108, the lighting standard, to do so. It told NHTSA in 2021 to keep its New Car Assessment Program up to date; in March 2022 the regulator proposed adding blind spot detection, electronic lane-keeping and pedestrian emergency braking. The Alliance also wants camera-based driver monitoring in cars with advanced driver assistance, and it says no maker sells a self-driving vehicle today.

Its members have promised rear seat reminders as standard equipment on US cars from the 2025 model year, pointing out that interior temperatures can rise 20 degrees in 10 minutes. It favours a ban on handheld phone use at the wheel. It opposes the Right to Repair bills before Congress and state legislatures, arguing that independent shops already have the information they need online. And in late 2010 it joined a coalition suing the Environmental Protection Agency to block raising the ethanol content of petrol from 10 percent to 15 percent, citing concerns about engines not built for it.

What does MEMA do for parts makers?

The Motor and Equipment Manufacturers Association was founded in 1904 as the Automotive Parts and Accessories Association. It became the Motor Accessories and Manufacturers Association in 1914 and took its current name in 1953, when it began to represent both aftermarket and original equipment suppliers. It opened a Washington, D.C. office in 1960.

MEMA now represents more than 1,000 companies that make components and systems for light and heavy vehicles. Component makers account for nearly 3 percent of US gross domestic product and, counting direct and indirect effects, 4.26 million jobs, an increase of nearly 18 percent from 2012. Because parts cross the borders of North America to be combined and then imported back for final assembly, the integrated supply chain matters to its members.

The four affiliates

MEMA is the parent of four associations. The Automotive Aftermarket Suppliers Association, set up in 2002, serves makers of aftermarket parts, tools and equipment, a sector supporting 871,000 American jobs, and co-owns its Las Vegas show, the Automotive Aftermarket Products Expo, with the Auto Care Association, drawing more than 2,500 exhibiting companies. A vehicle joins the aftermarket as soon as it is sold, whether the work is done by a dealership, an independent shop or the owner.

The Heavy Duty Manufacturers Association, formed in 1983, serves 220+ commercial vehicle suppliers. The Original Equipment Suppliers Association, formed in 1998, says original equipment suppliers account for roughly 70 percent of a vehicle's value, through components and new technology. The Association for Sustainable Manufacturing, created in 2011, promotes remanufacturing under the slogan Reduce. Reuse. Reman. Recycle, and runs a Manufactured Again Certification based on ISO 9001 and IATF 16949.

What does SEMA do for drivers and modifiers?

SEMA was formed in 1963 by twelve people including Paul Schiefer, Roy Richter, Ed Iskenderian, Bob Hedman and Vic Edelbrock Jr. It came about as Revell Models tried to fill a gap in trade regulation, and Iskenderian was its first president. It has 6,383 member companies, covering aftermarket manufacturers, car makers, media, dealers, distributors, installers, retailers and restoration specialists.

From the Dodger Stadium basement to Las Vegas

SEMA staged its first show in 1967, in the basement of Dodger Stadium in Los Angeles, with 98 manufacturers and 3,000 visitors. Five cars were on display, among them a 1967 Ford GT40 and a drag-race-prepared Dodge Dart. The show moved to Anaheim Stadium in 1974, and in the early 1970s a booth cost $375.00. By 1976, the last Anaheim year, it sold out with 570 booths. A move to Las Vegas followed in 1977, chosen for room to grow, dependable weather, entertainment and a famous location.

Innovations Day seminars were planned in 1979, and a year later Lee Iacocca gave the keynote, drawing more than 460 people. The show absorbed an import parts section in 1983, and in 1992 it joined with a parts-supplier show to form Automotive Aftermarket Industry Week. In 1998 it passed 500,000 net square feet, and it now fills more than one million. It draws over 3,000 media, 60,000 buyers and more than 2,300 exhibitors. Held in the first week of November, it takes over the Las Vegas Convention Center and is closed to the public. On 5 August 2020 SEMA cancelled that year's show, for the first time in its history, because of the COVID-19 pandemic.

The SEMA Action Network

The SEMA Action Network dates from 1997 and brings enthusiasts, vehicle clubs and specialty parts firms across the US and Canada together behind hobby-friendly laws. It has pushed for registration and titling rules for hot rods and custom vehicles in over 20 states, sought to protect classic cars awaiting restoration from confiscation on private property, and promoted lower taxes and fees for hobbyist vehicles. It has also defended the right to use loud aftermarket exhausts and emission control delete systems on public roads and opposed Cash for Clunkers.

What do these trade bodies mean for someone buying or driving a car?

Their effects show up in showrooms and garages. The Alliance's rear seat reminder pledge covers US vehicles by the 2025 model year, and the adaptive driving beam rule changed what headlights can do. ACEA has looked at which connectors European home chargers should use. MEMA's members make the parts under the body, and SEMA's show and lobbying set the tone for modified cars.

What is still unsettled for the Alliance and ACEA?

The August 2021 Biden order set a target of half of new US vehicles sold in 2030 being zero-emission, covering battery, hybrid and hydrogen fuel cell vehicles. NHTSA has recommended a 10-year road map for future NCAP programmes and is seeking input on ranking driver assistance technologies. ACEA, meanwhile, is operating without Stellantis and Volvo Cars after their 2022 departures.

Frequently asked questions

What does ACEA stand for?
ACEA stands for the European Automobile Manufacturers Association, or Association des Constructeurs Europeens d'Automobiles in French. It is the main lobbying and standards group of the car industry in the European Union and succeeded the CCMC manufacturers committee in February 1991.
Which carmakers belong to the Alliance for Automotive Innovation?
After the January 2020 merger, the Alliance represents nearly every manufacturer selling cars and light trucks in the United States, including General Motors, Ford and Chrysler, as well as the importers that belonged to the Association of Global Automakers. Suppliers and startups can join as well.
What is the SEMA Show?
The SEMA Show is the annual aftermarket trade show held in the first week of November at the Las Vegas Convention Center. It is not open to the public, and registration as media, manufacturer, buyer or exhibitor is required. It started in 1967 and has grown to more than 2,300 exhibitors.
What do the MEMA affiliates do?
MEMA has four affiliates. The Automotive Aftermarket Suppliers Association serves aftermarket makers, the Heavy Duty Manufacturers Association serves commercial vehicle suppliers, the Original Equipment Suppliers Association serves original equipment suppliers, and the Association for Sustainable Manufacturing promotes remanufacturing.
Why did Stellantis and Volvo Cars leave ACEA?
Stellantis announced on 13 June 2022 that it would leave ACEA by the end of 2022 as part of a new approach to the challenges of future mobility. Volvo Cars announced its exit on 8 July 2022, citing differences between its zero-emission strategy and the association's.

Sources

  1. SEMA (association) - Wikipedia
  2. Alliance for Automotive Innovation - Wikipedia
  3. European Automobile Manufacturers Association - Wikipedia
  4. Motor & Equipment Manufacturers Association - Wikipedia
Next story / Marques

Chrysler Europe: The Simca, Rootes and Barreiros Group, 1967 to 1978